MORE WATER STORED FOR LESS MONEY

SAVE MONEY - SAVE WATER - LOOK AT THE WARRANTY! 

STEEL WATER TANKS - 20 YEAR Warranty

Australian Made, Bluescope Steel, Galvanised Trusses, Quality Fitting's.

Rural Farms, Dairies, Horticulture, Small Acre Subdivisions, Country Homes, City Properties - Ideal for hard to access area's where all components can be waled in and assembled. No need for crane hire. 

Bolted Steel Panel Construction, Heavy Duty Design, Fire Proof - Dome Roof Construction fully enclosed, Manhole, Overflow, 50 mm outlet, Anode protection for corrosion.

Colorbond Range Colours:

Pale Eucalypt, Woodland Grey, Cottage Green, Classic Cream, Monument, Paperbark,

Ironstone, Deep Ocean, Manor Red, Cove, Shale Grey, Dune, Surfmist, Gully,

Evening Haze, Windspray, Mangrove, Wallaby, Jasper, Basalt, Terrain, Night Sky

Tank Models

Pricing Includes GST & Installation All Tank Models are 2.2m high

Note: Installation on site is included in price - Delivery charges will apply depending on site location.

1. PAD SPECIFICATIONS

The preparation of the pad for your Rhino Tank is the responsibility of the customer. Our preferred base material is fine crusher dust; however, if crusher dust is not available in your area please insist on using screened course river sand. It must be free of sticks, stones and clay lumps (6mm diameter or less).

Level Pad (+/- 10mm)

Minimum thickness of pad is 150mm

Dimensions are outlined on the enclosed pad specification sheet.

Ensure adequate compaction of the sub soil to avoid subsidence for deep pads.

The customer is required to place an exclusion zone of minimum 10mm Blue Metal/Stone (no clay or concrete) around the base of the tank after installation to prevent erosion and deter rodents from digging around the base.

If Site Access or the Pad Quality is not adequate, it may be necessary for our installation team to leave the tank and re schedule the installation (possibly weeks) until the problem is corrected. Unfortunately, this will incur additional charges over and above the specified cost (to cover wages and travel).

2. SITE ACCESS

Please ensure adequate access to the site for a small truck or 4WD and trailer, bearing in mind soil and weather conditions.

Access is to be available to within 10 metres of site.

If unable to meet these requirements please contact Rhino Water Tanks to make alternative arrangements.

3. ON THE DAY

Attendance:

You are most welcome to attend on the day but it is not essential. It is difficult to finalise a particular installation date in advance due to the weather, freight and labour.

Water:

The customer is required to arrange supply of 8,000 – 12,000 litres of water upon completion to stabilize the liner. This amount represents the average of a single truck load of water.
 

Note:

Rhino Water Tanks & Liners are suitable for the storage of water within a PH range of 3-9, and a Temperature range of -6ᵒ - 40ᵒ.

Payment

A Tax Invoice will be forwarded upon notification by the installer of Practical Completion. Payment is due on receipt of the Tax Invoice.

4. PAD PREPARATION

The pad must be level to +/- 10mm

Suggested Pad Levelling Technique

With a spirit level on top of a screed, level out the sand or crusher dust using a temporary pole in the centre of the pad as a pivot point.

Spirit Level

Temporary Pole

Screed pivoted in centre

150mm

Most sites will fall into 3 main categories:

1. Level existing site therefore Pad preparation is reasonably straight forward.

150mm

2. Slightly sloping site therefore Pad needs to compensate slope to ensure it is level.

150mm

150mm

Cut in drain to divert water.

3. Site has been cut in to create level base therefore we recommend a drain to be dug into the slope above the pad to allow water runoff to be diverted around the tank when it rains. SLS-PRO-007 PAD Specification Guidelines V 1.0 Date Effective: 02/12/2013 Page 3 of 3

Pad Specification Guidelines SLS-PRO-007

5. PAD SIZES